B4208107
CARRYTEC S
Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply
Top and bottom parts, TPE handle pad, assembly kit
Zavřít
CARRYTEC S
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
222x205x80mm
IP 54 opt.
B4208208
CARRYTEC S
Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply
Top and bottom parts, TPE handle pad, assembly kit
Zavřít
CARRYTEC S
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
222x205x80mm
IP 54 opt.
B4210107
CARRYTEC M
Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply
Top and bottom parts, TPE handle pad, assembly kit
Zavřít
CARRYTEC M
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
270x247x91mm
IP 54 opt.
B4210127
CARRYTEC M slim version
Strong plastic enclosure with handle, slim version. Ideal for the installation of tablet computers and the like, which have modest space requirements and can be carried comfortably and securely in the Carrytec.
The top part is identical with that of the larger enclosure versions; only the bottom part is flatter.
Top part with recessed surface for using membrane keyboards. Attachment domes for PCBs and components in the top and bottom parts. Interface installation at the rear, for example for support arm applications, ensures orderly cable routing through enclosure connection.
Supply
Top and bottom parts, TPE handle pad, assembly kit
Zavřít
CARRYTEC M slim version
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
270x247x42mm
IP 54 opt.
B4210208
CARRYTEC M
Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply
Top and bottom parts, TPE handle pad, assembly kit
Zavřít
CARRYTEC M
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
270x247x91mm
IP 54 opt.
B4210228
CARRYTEC M slim version
Strong plastic enclosure with handle, slim version. Ideal for the installation of tablet computers and the like, which have modest space requirements and can be carried comfortably and securely in the Carrytec.
The top part is identical with that of the larger enclosure versions; only the bottom part is flatter.
Top part with recessed surface for using membrane keyboards. Attachment domes for PCBs and components in the top and bottom parts. Interface installation at the rear, for example for support arm applications, ensures orderly cable routing through enclosure connection.
Supply
Top and bottom parts, TPE handle pad, assembly kit
Zavřít
CARRYTEC M slim version
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
270x247x42mm
IP 54 opt.
B4213107
CARRYTEC L
Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, mounting points match the hole patterns of VESA MIS-D 100. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply
Top and bottom parts, TPE handle pad, assembly kit
Zavřít
CARRYTEC L
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
348x303x117mm
IP 54 opt.
B4213208
CARRYTEC L
Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, mounting points match the hole patterns of VESA MIS-D 100. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply
Top and bottom parts, TPE handle pad, assembly kit
Zavřít
CARRYTEC L
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
348x303x117mm
IP 54 opt.
A0325080
Self-tapping screws 2.5 x 8 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.
Supply
1 self-tapping screw
Zavřít
Self-tapping screws 2.5 x 8 mm (PZ1)
Produkt byl přidán do Vašeho košíku.
A0399T10
Torx T10 screwdriver
Screwdriver with ergonomic handle for reliably turning, tightening and loosening Torx T10 type screws. (original can deviate from photo)
Supply
1 screwdriver
Zavřít
Torx T10 screwdriver
Produkt byl přidán do Vašeho košíku.
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Zavřít
Contacts, male
Produkt byl přidán do Vašeho košíku.
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
Zavřít
Contacts, female
Produkt byl přidán do Vašeho košíku.
gold-plated
A9193042
Mounting plates for contacts
Universal accessories that simplify the assembly of contacts for transferring data and charging current between enclosures and stations. Available as a kit consisting of two plastic mounting plates for holding the 6-pin contacts which are available as accessories ("female" contact for the enclosure and "male" contact for the station).
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station. The mounting plates can be installed first in the enclosure and station, and the contacts (accessories) at a later point in time.
Supply
2 mounting plates
Zavřít
Mounting plates for contacts
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
black RAL 9005
A9193044
Contacting kit, 6-pin
Universal accessory consisting of mounting plates and 6-pin contacts. Simplifies the assembly of contacts for transferring data and charging current between enclosures and stations. The "female" and "male" contacts are already permanently glued in the corresponding mounting plate. The contact pins are freely accessible for soldering work.
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station ("female" contact for the enclosure and "male" contact for the station).
Supply
2 mounting plates, 2 6-pin contacts ("female" and "male")
Zavřít
Contacting kit, 6-pin
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
black RAL 9005
A9338117
Battery compartment kit, 5 x AA
For direct installation in front panels or case walls. Easy battery replacement. Battery compartment lid for snap-in and/or screw-on mounting.
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.
Supply
1 battery comp., 1 battery comp. lid + M3 screw, 1 holder, 2 sealings, 1 set of battery clips, nickel-plated, 4 self-tapping screws
Zavřít
Battery compartment kit, 5 x AA
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
93x98mm
IP 54
A9338218
Battery compartment kit, 5 x AA
For direct installation in front panels or case walls. Easy battery replacement. Battery compartment lid for snap-in and/or screw-on mounting.
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.
Supply
1 battery comp., 1 battery comp. lid + M3 screw, 1 holder, 2 sealings, 1 set of battery clips, nickel-plated, 4 self-tapping screws
Zavřít
Battery compartment kit, 5 x AA
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
93x98mm
IP 54
B4308001
Sealing S
Application: for increasing the protection class, of CARRYTEC S. Bottom part with groove to assemble the sealing.
Supply
1 sealing
Zavřít
Sealing S
Produkt byl přidán do Vašeho košíku.
B4308117
Station S/M
For secure storage of the enclosure. Can be used on table stand and/or wall suspension element. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.
Supply
1 base, assembly kit
Zavřít
Station S/M
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
B4308127
Base plate for station
Recommended for table-top applications. The rubber feet included in the supply ensure that the table-top version does not slip.
Supply
1 base plate, 4 rubber feet, assembly kit
Zavřít
Base plate for station
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
B4308218
Station S/M
For secure storage of the enclosure. Can be used on table stand and/or wall suspension element. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.
Supply
1 base, assembly kit
Zavřít
Station S/M
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
B4308228
Base plate for station
Recommended for table-top applications. The rubber feet included in the supply ensure that the table-top version does not slip.
Supply
1 base plate, 4 rubber feet, assembly kit
Zavřít
Base plate for station
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
B4308237
Holding clamps
For hanging the enclosure from round tubes Ø 32 mm and standard equipment rails DIN EN ISO 19054 (25 x 10 mm). 2 locating holes Ø 2.4 mm are required. For attachment, 2 stainless steel Torx screws Ø 3 x 8 mm (Torx 10) are included in the set.
Supply
1 holding clamp, assembly kit
Zavřít
Holding clamps
Produkt byl přidán do Vašeho košíku.
PA 6
off-white RAL 9002
B4308238
Holding clamps
For hanging the enclosure from round tubes Ø 32 mm and standard equipment rails DIN EN ISO 19054 (25 x 10 mm). 2 locating holes Ø 2.4 mm are required. For attachment, 2 stainless steel Torx screws Ø 3 x 8 mm (Torx 10) are included in the set.
Supply
1 holding clamp, assembly kit
Zavřít
Holding clamps
Produkt byl přidán do Vašeho košíku.
PA 6
lava
B4308600
Carrying case S, right-hand side
Specially designed for CARRYTEC S. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).
Version
Right-hand side.
Supply
1 carrying case, left-hand side, assembly kit
Zavřít
Carrying case S, right-hand side
Produkt byl přidán do Vašeho košíku.
grey
82x180x65mm
B4308610
Carrying case S, left-hand side
Specially designed for CARRYTEC S. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).
Version
Left-hand side.
Supply
1 carrying case, left-hand side, assembly kit
Zavřít
Carrying case S, left-hand side
Produkt byl přidán do Vašeho košíku.
grey
82x180x65mm
B4308650
Shoulder strap
Practical shoulder strap with shoulder padding.
Supply
1 shoulder strap
Zavřít
Shoulder strap
Produkt byl přidán do Vašeho košíku.
grey
1400mm
B4310001
Sealing M
Application: for increasing the protection class, of CARRYTEC M.
Supply
1 sealing
Zavřít
Sealing M
Produkt byl přidán do Vašeho košíku.
B4310600
Carrying case M, right-hand side
Specially designed for CARRYTEC M. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).
Version
Right-hand side.
Supply
1 carrying case, left-hand side, assembly kit
Zavřít
Carrying case M, right-hand side
Produkt byl přidán do Vašeho košíku.
grey
99x214x64mm
B4310610
Carrying case M, left-hand side
Specially designed for CARRYTEC M. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).
Version
Left-hand side.
Supply
1 carrying case, left-hand side, assembly kit
Zavřít
Carrying case M, left-hand side
Produkt byl přidán do Vašeho košíku.
grey
99x214x64mm
B4313001
Sealing L
Application: for increasing the protection class, of CARRYTEC L.
Supply
1 sealing
Zavřít
Sealing L
Produkt byl přidán do Vašeho košíku.
B4313117
Station L
For secure storage of the enclosure. Can be used on table stand or as wall suspension element. By using it as a wall suspension element the adapter (accessories) is needed. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.
Supply
1 base, assembly kit
Zavřít
Station L
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
B4313147
Adapter for Station L
Adapter for mounting Station L on a wall. Supplied with two self-tapping screws for attaching Station L.
Supply
1 adapter and 2 self-tapping screws
Zavřít
Adapter for Station L
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
off-white RAL 9002
B4313218
Station L
For secure storage of the enclosure. Can be used on table stand or as wall suspension element. By using it as a wall suspension element the adapter (accessories) is needed. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.
Supply
1 base, assembly kit
Zavřít
Station L
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
B4313248
Adapter for Station L
Adapter for mounting Station L on a wall. Supplied with two self-tapping screws for attaching Station L.
Supply
1 adapter and 2 self-tapping screws
Zavřít
Adapter for Station L
Produkt byl přidán do Vašeho košíku.
ASA+PC
(UL 94 V-0)
lava
Možnosti přizpůsobení pro Carrytec
Co ještě potřebujete pro svůj vlastní velmi osobní produkt? Můžeme dodat zapouzdření a ladicí knoflíky se všemi nezbytnými úpravami pro montáž vašich elektronických součástek.
DIN modulární skříňka
Plastová zapouzdření Pokročilé plastové skříně pro elektrotechniku a elektroniku
Hliníkové zapouzdření Vysoce kvalitní hliníkový profil v atraktivním mixu s plasty
Otočné knoflíky Rozsáhlá řada ovládacích prvků: ergonomický, moderní a klasický design
Mechanické opracování Rychlé, vysoce kvalitní a přesné obrábění dle Vašeho přání
Lakování Malujeme naše produkty s vysoce atraktivními a odolnými barvami pro náročná použití
Tisk Tiskneme na zapouzdření, přední panely, či otočné knoflíky pomocí sítotisku či tampo tisku a digitálního tisku
Laserové značení Nabízíme laserové značení pro mnoho zapouzdření a komponentů z naší standartní nabídky
Dekorační fólie Tiskáme dekorativní fólie pro digitální zachycení případů v kvalitě fotografií
Zakázkový materiál Na přání vyrábíme pouzdra a knoflíky ve mnoha barvách
Stínění EMC Objednejte si plastová zapouzdření s vnitřní vrstou hliníku pro ochranu proti RFI/EMI
Kompletace / Montáž Provádíme montáž pro zajištění správné instalace zapouzdření, či zařízení
Partnerské řešení Spolupracujeme s vysoce výkonnými partnery
Zdravotnictví / Laboratoř / Wellness Lidé a ergonomie
Měřící- / regulační technika / automatizace Lidé a precisnostn
Strojírenství / Stavebnictví Lidé a výroba
Technologie vozidel / Stavební technika / Vojenská technika / Letecká doprava Lidé a mobilita
Topení / klimatizace / životní prostředí Lidé a efektivita
Bezpečnostní technologie / technologie budov Lidé a technologie
Komunikace Lidé a informace
Těžba / plyn / ropa Lidé a komodity
Novinky
Užitečné informace o dopravě a našich všeobecných obchodních podmínkách
Odborné znalosti přímo od odborníků
Pokyny k montáži, certifikáty a zákaznický časopis INSIDE
PDF a AutoCAD DWF
Za předpokladu odpovědnosti
Ochranu vašich osobních údajů bereme velmi vážně a chceme, abyste se cítil bezpečně, když navštívíte naši stránku.
Zákonné oznámení
Jsme tu, když nás potřebujete
OKW weltweit
