Minimum components
1 knob.
1 cover.
1 assembly kit flush-fitting version.
1 LED illumination.
System components to complete
B8633008
Cover 33
Suitable for STAR-KNOB 33. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 33
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8633009
Cover 33
Suitable for STAR-KNOB 33. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 33
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8633108
Cover 33, with finger recess
Suitable for STAR-KNOB 33. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 33, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8633109
Cover 33, with finger recess
Suitable for STAR-KNOB 33. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 33, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8733118
Assembly kit 33, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter 33. Optional illumination possible only in conjunction with the translucent knob(colours diamond, ruby, emerald or sapphire).
Supply
1 assembly kit
Zavřít
Assembly kit 33, flush fitting version
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8733119
Assembly kit 33, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter 33. Optional illumination possible only in conjunction with the translucent knob(colours diamond, ruby, emerald or sapphire).
Supply
1 assembly kit
Zavřít
Assembly kit 33, flush fitting version
Produkt byl přidán do Vašeho košíku.
PA 6
nero
Accessory "illumination"
B7546001
LED illumination kit, 8 LEDs (RGB backlight)
Board D=27 mm with 8 LEDs (RGB backlight), without controller, SMD technology, connecting cable 120 mm long, 4-pin socket at the end, incl. connector.
Recommended for:
STAR-KNOBS 33 / 41
- flush-fitting version: only in conjunction with the diamond knob
- surface-mounted version: only in conjunction with the diamond assembly kit
CONTROL-KNOBS 36 with optional illumination
- installation in the bases available as accessories
Supply
1 LED illumination kit (RGB backlight)
Zavřít
LED illumination kit, 8 LEDs (RGB backlight)
Produkt byl přidán do Vašeho košíku.
B8733004
LED illumination kit
PCB D = 27 mm with 8 LEDs (white light), SMD-technology, connecting cable 120 mm long, 2-pin connector at the end, incl. PCB connector. Universally applicable for knob sizes 33 and 41 mm.
Recommended for flush-fitting version: only in conjunction with the translucent* knob.
Recommended for surface-mounted version: only in conjunction with the translucent* assembly kit.
(*translucent = colours diamond, ruby, emerald, sapphire).
Supply
1 LED illumination kit
Zavřít
LED illumination kit
Produkt byl přidán do Vašeho košíku.
Accessory
A6207009
Round nut M7 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M7 x 0.75
Produkt byl přidán do Vašeho košíku.
A6210009
Round nut M10 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M10 x 0.75
Produkt byl přidán do Vašeho košíku.
A6295009
Round nut 3/8"-32G
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut 3/8"-32G
Produkt byl přidán do Vašeho košíku.
A6300000
Spanner
For tightening the round nut. Suitable for round nuts M7 x 0.75, M10 x 0.75 and 3/8"-32G.
Supply
1 spanner
Zavřít
Spanner
Produkt byl přidán do Vašeho košíku.
B8733001
Assembly support 33
Holds the knob when tightening the collet (flush-fitting variant) and positions it in the correct height on the axis of rotary pulse generators (flush-fitting and surface-mounted variant).
Supply
1 assembly support
Zavřít
Assembly support 33
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
green
Minimum components
1 knob.
1 cover.
1 assembly kit flush-fitting version.
System components to complete
B8633008
Cover 33
Suitable for STAR-KNOB 33. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 33
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8633009
Cover 33
Suitable for STAR-KNOB 33. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 33
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8633108
Cover 33, with finger recess
Suitable for STAR-KNOB 33. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 33, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8633109
Cover 33, with finger recess
Suitable for STAR-KNOB 33. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 33, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8733118
Assembly kit 33, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter 33. Optional illumination possible only in conjunction with the translucent knob(colours diamond, ruby, emerald or sapphire).
Supply
1 assembly kit
Zavřít
Assembly kit 33, flush fitting version
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8733119
Assembly kit 33, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter 33. Optional illumination possible only in conjunction with the translucent knob(colours diamond, ruby, emerald or sapphire).
Supply
1 assembly kit
Zavřít
Assembly kit 33, flush fitting version
Produkt byl přidán do Vašeho košíku.
PA 6
nero
Accessory "illumination"
B7546001
LED illumination kit, 8 LEDs (RGB backlight)
Board D=27 mm with 8 LEDs (RGB backlight), without controller, SMD technology, connecting cable 120 mm long, 4-pin socket at the end, incl. connector.
Recommended for:
STAR-KNOBS 33 / 41
- flush-fitting version: only in conjunction with the diamond knob
- surface-mounted version: only in conjunction with the diamond assembly kit
CONTROL-KNOBS 36 with optional illumination
- installation in the bases available as accessories
Supply
1 LED illumination kit (RGB backlight)
Zavřít
LED illumination kit, 8 LEDs (RGB backlight)
Produkt byl přidán do Vašeho košíku.
Accessory
A6207009
Round nut M7 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M7 x 0.75
Produkt byl přidán do Vašeho košíku.
A6210009
Round nut M10 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M10 x 0.75
Produkt byl přidán do Vašeho košíku.
A6295009
Round nut 3/8"-32G
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut 3/8"-32G
Produkt byl přidán do Vašeho košíku.
A6300000
Spanner
For tightening the round nut. Suitable for round nuts M7 x 0.75, M10 x 0.75 and 3/8"-32G.
Supply
1 spanner
Zavřít
Spanner
Produkt byl přidán do Vašeho košíku.
B8733001
Assembly support 33
Holds the knob when tightening the collet (flush-fitting variant) and positions it in the correct height on the axis of rotary pulse generators (flush-fitting and surface-mounted variant).
Supply
1 assembly support
Zavřít
Assembly support 33
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
green
Minimum components
1 knob.
1 cover.
1 assembly kit surface-mounted version.
1 LED illumination.
System components to complete
B8633008
Cover 33
Suitable for STAR-KNOB 33. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 33
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8633009
Cover 33
Suitable for STAR-KNOB 33. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 33
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8633108
Cover 33, with finger recess
Suitable for STAR-KNOB 33. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 33, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8633109
Cover 33, with finger recess
Suitable for STAR-KNOB 33. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 33, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8733201
Assembly kit 33, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 33. Optional illumination possible, please order LED illumination separately.
Supply
1 assembly kit
Zavřít
Assembly kit 33, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PC
(UL 94 HB)
diamond
B8733206
Assembly kit 33, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 33. Optional illumination possible, please order LED illumination separately.
Supply
1 assembly kit
Zavřít
Assembly kit 33, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PC
(UL 94 HB)
saphire
Accessory "illumination"
B7546001
LED illumination kit, 8 LEDs (RGB backlight)
Board D=27 mm with 8 LEDs (RGB backlight), without controller, SMD technology, connecting cable 120 mm long, 4-pin socket at the end, incl. connector.
Recommended for:
STAR-KNOBS 33 / 41
- flush-fitting version: only in conjunction with the diamond knob
- surface-mounted version: only in conjunction with the diamond assembly kit
CONTROL-KNOBS 36 with optional illumination
- installation in the bases available as accessories
Supply
1 LED illumination kit (RGB backlight)
Zavřít
LED illumination kit, 8 LEDs (RGB backlight)
Produkt byl přidán do Vašeho košíku.
B8733004
LED illumination kit
PCB D = 27 mm with 8 LEDs (white light), SMD-technology, connecting cable 120 mm long, 2-pin connector at the end, incl. PCB connector. Universally applicable for knob sizes 33 and 41 mm.
Recommended for flush-fitting version: only in conjunction with the translucent* knob.
Recommended for surface-mounted version: only in conjunction with the translucent* assembly kit.
(*translucent = colours diamond, ruby, emerald, sapphire).
Supply
1 LED illumination kit
Zavřít
LED illumination kit
Produkt byl přidán do Vašeho košíku.
Accessory
A6207009
Round nut M7 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M7 x 0.75
Produkt byl přidán do Vašeho košíku.
A6210009
Round nut M10 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M10 x 0.75
Produkt byl přidán do Vašeho košíku.
A6295009
Round nut 3/8"-32G
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut 3/8"-32G
Produkt byl přidán do Vašeho košíku.
A6300000
Spanner
For tightening the round nut. Suitable for round nuts M7 x 0.75, M10 x 0.75 and 3/8"-32G.
Supply
1 spanner
Zavřít
Spanner
Produkt byl přidán do Vašeho košíku.
B8733001
Assembly support 33
Holds the knob when tightening the collet (flush-fitting variant) and positions it in the correct height on the axis of rotary pulse generators (flush-fitting and surface-mounted variant).
Supply
1 assembly support
Zavřít
Assembly support 33
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
green
Minimum components
1 knob.
1 cover.
1 assembly kit surface-mounted version.
System components to complete
B8633008
Cover 33
Suitable for STAR-KNOB 33. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 33
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8633009
Cover 33
Suitable for STAR-KNOB 33. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 33
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8633108
Cover 33, with finger recess
Suitable for STAR-KNOB 33. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 33, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8633109
Cover 33, with finger recess
Suitable for STAR-KNOB 33. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 33, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8733201
Assembly kit 33, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 33. Optional illumination possible, please order LED illumination separately.
Supply
1 assembly kit
Zavřít
Assembly kit 33, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PC
(UL 94 HB)
diamond
B8733206
Assembly kit 33, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 33. Optional illumination possible, please order LED illumination separately.
Supply
1 assembly kit
Zavřít
Assembly kit 33, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PC
(UL 94 HB)
saphire
B8733218
Assembly kit 33, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 33.
Supply
1 assembly kit
Zavřít
Assembly kit 33, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8733219
Assembly kit 33, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 33.
Supply
1 assembly kit
Zavřít
Assembly kit 33, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PA 6
nero
Accessory "illumination"
B7546001
LED illumination kit, 8 LEDs (RGB backlight)
Board D=27 mm with 8 LEDs (RGB backlight), without controller, SMD technology, connecting cable 120 mm long, 4-pin socket at the end, incl. connector.
Recommended for:
STAR-KNOBS 33 / 41
- flush-fitting version: only in conjunction with the diamond knob
- surface-mounted version: only in conjunction with the diamond assembly kit
CONTROL-KNOBS 36 with optional illumination
- installation in the bases available as accessories
Supply
1 LED illumination kit (RGB backlight)
Zavřít
LED illumination kit, 8 LEDs (RGB backlight)
Produkt byl přidán do Vašeho košíku.
Accessory
A6207009
Round nut M7 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M7 x 0.75
Produkt byl přidán do Vašeho košíku.
A6210009
Round nut M10 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M10 x 0.75
Produkt byl přidán do Vašeho košíku.
A6295009
Round nut 3/8"-32G
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut 3/8"-32G
Produkt byl přidán do Vašeho košíku.
A6300000
Spanner
For tightening the round nut. Suitable for round nuts M7 x 0.75, M10 x 0.75 and 3/8"-32G.
Supply
1 spanner
Zavřít
Spanner
Produkt byl přidán do Vašeho košíku.
B8733001
Assembly support 33
Holds the knob when tightening the collet (flush-fitting variant) and positions it in the correct height on the axis of rotary pulse generators (flush-fitting and surface-mounted variant).
Supply
1 assembly support
Zavřít
Assembly support 33
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
green
Customising options for B8333066
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
DIN modulární skříňka
Přidat do košíku 
