Ricerca avanzata N. ordinazione
Login Your location/language Germany, Italiano
A0308031 Self-tapping screws 3 x 8 mm (PZ1)

A0308031

Self-tapping screws 3 x 8 mm (PZ1)

Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.

Supply

1 self-tapping screw

  • Usato per
A0214070 EURO CASE 42 TE, without handle

A0214070

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet

Chiudi

A0214070

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x54mm
A0214170 EURO CASE 42 TE, without handle

A0214170

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each

Chiudi

A0214170

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x54mm
A0214270 EURO CASE 42 TE, without handle

A0214270

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet

Chiudi

A0214270

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x54mm
A0216070 EURO CASE 63 TE, without handle

A0216070

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet

Chiudi

A0216070

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x54mm
A0216170 EURO CASE 63 TE, without handle

A0216170

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each

Chiudi

A0216170

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x54mm
A0216270 EURO CASE 63 TE, without handle

A0216270

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet

Chiudi

A0216270

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x54mm
A0224070 EURO CASE 42 TE, without handle

A0224070

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet

Chiudi

A0224070

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x98,5mm
A0224170 EURO CASE 42 TE, without handle

A0224170

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each

Chiudi

A0224170

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x98,5mm
A0224270 EURO CASE 42 TE, without handle

A0224270

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet

Chiudi

A0224270

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x98,5mm
A0224470 EURO CASE 42 TE, with handle

A0224470

EURO CASE 42 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE with hole, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet, 1 handle

Chiudi

A0224470

EURO CASE 42 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x98,5mm
A0224570 EURO CASE 42 TE, with handle

A0224570

EURO CASE 42 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panel.

Supply 2 shells, 2 side panels 1 HE with hole, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each, 1 handle

Chiudi

A0224570

EURO CASE 42 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x98,5mm
A0224670 EURO CASE 42 TE, with handle

A0224670

EURO CASE 42 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE with hole, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet, 1 handle

Chiudi

A0224670

EURO CASE 42 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x98,5mm
A0226070 EURO CASE 63 TE, without handle

A0226070

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet

Chiudi

A0226070

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x98,5mm
A0226170 EURO CASE 63 TE, without handle

A0226170

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each

Chiudi

A0226170

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x98,5mm
A0226270 EURO CASE 63 TE, without handle

A0226270

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet

Chiudi

A0226270

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x98,5mm
A0226470 EURO CASE 63 TE, with handle

A0226470

EURO CASE 63 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE with hole, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet, 1 handle

Chiudi

A0226470

EURO CASE 63 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x98,5mm
A0226570 EURO CASE 63 TE, with handle

A0226570

EURO CASE 63 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panel.

Supply 2 shells, 2 side panels 1 HE with hole, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each, 1 handle

Chiudi

A0226570

EURO CASE 63 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x98,5mm
A0226670 EURO CASE 63 TE, with handle

A0226670

EURO CASE 63 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE with hole, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet, 1 handle

Chiudi

A0226670

EURO CASE 63 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x98,5mm
A0234070 EURO CASE 42 TE, without handle

A0234070

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet

Chiudi

A0234070

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x143mm
A0234170 EURO CASE 42 TE, without handle

A0234170

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each

Chiudi

A0234170

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x143mm
A0234270 EURO CASE 42 TE, without handle

A0234270

EURO CASE 42 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet

Chiudi

A0234270

EURO CASE 42 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x143mm
A0234470 EURO CASE 42 TE, with handle

A0234470

EURO CASE 42 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE with hole, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet, 1 handle

Chiudi

A0234470

EURO CASE 42 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x143mm
A0234570 EURO CASE 42 TE, with handle

A0234570

EURO CASE 42 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE with hole, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each, 1 handle

Chiudi

A0234570

EURO CASE 42 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x143mm
A0234670 EURO CASE 42 TE, with handle

A0234670

EURO CASE 42 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE with hole, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet, 1 handle

Chiudi

A0234670

EURO CASE 42 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
260x250x143mm
A0236070 EURO CASE 63 TE, without handle

A0236070

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet

Chiudi

A0236070

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x143mm
A0236170 EURO CASE 63 TE, without handle

A0236170

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each

Chiudi

A0236170

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x143mm
A0236270 EURO CASE 63 TE, without handle

A0236270

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet

Chiudi

A0236270

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x143mm
A0236470 EURO CASE 63 TE, with handle

A0236470

EURO CASE 63 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE with hole, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet, 1 handle

Chiudi

A0236470

EURO CASE 63 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x143mm
A0236570 EURO CASE 63 TE, with handle

A0236570

EURO CASE 63 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE with hole, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each, 1 handle

Chiudi

A0236570

EURO CASE 63 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x143mm
A0236670 EURO CASE 63 TE, with handle

A0236670

EURO CASE 63 TE, with handle Modular construction without screws with handle. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 2 HE with hole, 2 snap-in panels with slots, 2 snap-in panels with slots, with feet, 1 handle

Chiudi

A0236670

EURO CASE 63 TE, with handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x143mm
A0266070 EURO CASE 63 TE, without handle

A0266070

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 4 side panels 2 HE, 2 snap-in panels without slots, 2 snap-in panels without slots, with feet

Chiudi

A0266070

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x276,5mm
A0266170 EURO CASE 63 TE, without handle

A0266170

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 4 side panels 2 HE, 1 snap-in panel without/with slots each, 1 snap-in panel without/with slots, with feet each

Chiudi

A0266170

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x276,5mm
A0266270 EURO CASE 63 TE, without handle

A0266270

EURO CASE 63 TE, without handle Modular construction without screws. Fixing support in the shells and side panels.

Supply 2 shells, 2 side panels 1 HE, 4 side panels 2 HE, 2 snap-in panel with slots, 2 snap-in panel with slots, with feet each

Chiudi

A0266270

EURO CASE 63 TE, without handle
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
367x250x276,5mm
A9010065 FLAT-PACK CASES 100 N, Vers. I

A9010065

FLAT-PACK CASES 100 N, Vers. I Two-piece case with flat top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9010065

FLAT-PACK CASES 100 N, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
100x50x25mm
IP 40
A9011065 FLAT-PACK CASES 100 H, Vers. I

A9011065

FLAT-PACK CASES 100 H, Vers. I Two-piece case with high top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9011065

FLAT-PACK CASES 100 H, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
100x50x40mm
IP 40
A9011665 PLUG CASE F / D, Vers. I

A9011665

PLUG CASE F / D, Vers. I Two-part plug case, French / German version. Fixing towers for the PCB assembly.

Version Without integrated socket, plug according to DIN 49441 R2

Supply 1 top part and 1 bottom part with plug section, assembly kit including 4 screws for the PCB fixing

Chiudi

A9011665

PLUG CASE F / D, Vers. I
Prodotto aggiunto alla lista
PC+ABS (UL 94 V-0)
off-white RAL 9002
100x50x40mm
A9020065 FLAT-PACK CASES 120 N, Vers. I

A9020065

FLAT-PACK CASES 120 N, Vers. I Two-piece case with flat top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9020065

FLAT-PACK CASES 120 N, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
120x65x40mm
IP 40
A9020265 FLAT-PACK CASE 120 S

A9020265

FLAT-PACK CASE 120 S Two-piece case. Top part with ventilation slots and open side base. Fastenings pillars for PCB mounting.

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9020265

FLAT-PACK CASE 120 S
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
120x65x40mm
A9021065 FLAT-PACK CASE 120 H, Vers. I

A9021065

FLAT-PACK CASE 120 H, Vers. I Two-piece case with high top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9021065

FLAT-PACK CASE 120 H, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
120x65x65mm
IP 40
A9021665 PLUG CASE F / D, Vers. I

A9021665

PLUG CASE F / D, Vers. I Two-part plug case, French / German version. Fixing towers for the PCB assembly.

Version Without integrated socket, plug according to DIN 49441 R2

Supply 1 top part and 1 bottom part with plug section, assembly kit including 4 screws for the PCB fixing

Chiudi

A9021665

PLUG CASE F / D, Vers. I
Prodotto aggiunto alla lista
PC+ABS (UL 94 V-0)
pebble grey RAL 7032
120x65x65mm
A9022465 PLUG CASE D, Vers. II

A9022465

PLUG CASE D, Vers. II Two-part plug case, German version. Fixing towers for the PCB assembly.

Version With integrated socket DIN 49440 and plug section DIN 49441 R2

Supply 1 top part with integrated socket and 1 bottom part with plug section, assembly kit including 4 screws for the PCB fixing

Chiudi

A9022465

PLUG CASE D, Vers. II
Prodotto aggiunto alla lista
PC+ABS (UL 94 V-0)
pebble grey RAL 7032
120x65x55mm
A9030065 FLAT-PACK CASES 150 N, Vers. I

A9030065

FLAT-PACK CASES 150 N, Vers. I Two-piece case with flat top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9030065

FLAT-PACK CASES 150 N, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
150x80x50mm
IP 40
A9030165 FLAT-PACK CASES 150 N, Vers. II

A9030165

FLAT-PACK CASES 150 N, Vers. II Two-piece case with flat top and open side base. Fastenings pillars for PCB mounting.

Version With handle bar

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9030165

FLAT-PACK CASES 150 N, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
150x80x50mm
IP 40
A9031065 FLAT-PACK CASE 150 H, Vers. I

A9031065

FLAT-PACK CASE 150 H, Vers. I Two-piece case with high top and open side base. Fastenings pillars for PCB mounting.

Version without handle bar.

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9031065

FLAT-PACK CASE 150 H, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
150x80x80mm
IP 40
A9032065 FLAT-PACK CASES 150 N, Vers. I

A9032065

FLAT-PACK CASES 150 N, Vers. I Two-piece case with flat top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, assembly kit and 4 screws for the mounting of PCBs

Chiudi

A9032065

FLAT-PACK CASES 150 N, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
150x80x55mm
IP 40
A9040065 FLAT-PACK CASES 189 N, Vers. I

A9040065

FLAT-PACK CASES 189 N, Vers. I Two-piece case with flat top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, 4 M3-screws for case, 4 screws for the mounting of PCBs

Chiudi

A9040065

FLAT-PACK CASES 189 N, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
189x110x60mm
IP 40
A9040165 FLAT-PACK CASES 189 N, Vers. II

A9040165

FLAT-PACK CASES 189 N, Vers. II Two-piece case with flat top and open side base. Fastenings pillars for PCB mounting.

Version With handle bar

Supply 1 top and base part, 4 M3-screws for case, 4 screws for the mounting of PCBs

Chiudi

A9040165

FLAT-PACK CASES 189 N, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
189x110x60mm
IP 40
A9041065 FLAT-PACK CASE 189 H, Vers. I

A9041065

FLAT-PACK CASE 189 H, Vers. I Two-piece case with high top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, 4 M3-screws for case, 4 screws for the mounting of PCBs

Chiudi

A9041065

FLAT-PACK CASE 189 H, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
189x110x97mm
IP 40
A9041165 FLAT-PACK CASE 189 H, Vers. II

A9041165

FLAT-PACK CASE 189 H, Vers. II Two-piece case with high top and open side base. Fastenings pillars for PCB mounting.

Version With handle bar

Supply 1 top and base part, 4 M3-screws for case, 4 screws for the mounting of PCBs

Chiudi

A9041165

FLAT-PACK CASE 189 H, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
189x110x97mm
IP 40
A9042065 FLAT-PACK CASE 189 H, Vers. I

A9042065

FLAT-PACK CASE 189 H, Vers. I Two-piece case with high top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, 4 M3-screws for case, 4 screws for the mounting of PCBs

Chiudi

A9042065

FLAT-PACK CASE 189 H, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
189x110x120mm
IP 40
A9043065 FLAT-PACK CASES 189 N, Vers. I

A9043065

FLAT-PACK CASES 189 N, Vers. I Two-piece case with flat top and open side base. Fastenings pillars for PCB mounting.

Version Without handle bar

Supply 1 top and base part, 4 M3-screws for case, 4 screws for the mounting of PCBs

Chiudi

A9043065

FLAT-PACK CASES 189 N, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
189x110x70mm
IP 40
A9043265 FLAT-PACK CASE 189 L

A9043265

FLAT-PACK CASE 189 L Two-piece case. Top part with ventilation slots and open side base. Fastenings pillars for PCB mounting.

Supply 1 top and base part, 4 M3-screws for case, 4 screws for the mounting of PCBs

Chiudi

A9043265

FLAT-PACK CASE 189 L
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
189x110x70mm
A9046107 HAND-TERMINAL M, Vers. I

A9046107

HAND-TERMINAL M, Vers. I Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With closed operation area

Supply top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

Chiudi

A9046107

HAND-TERMINAL M, Vers. I
Prodotto aggiunto alla lista
PC+ABS (UL 94 V-0)
off-white RAL 9002
220x120x65mm
IP 65 opt.
A9046109 HAND-TERMINAL M, Vers. I

A9046109

HAND-TERMINAL M, Vers. I Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With closed operation area

Supply Top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

Chiudi

A9046109

HAND-TERMINAL M, Vers. I
Prodotto aggiunto alla lista
PC+ABS (UL 94 V-0)
black RAL 9005
220x120x65mm
IP 65 opt.
A9046207 HAND-TERMINAL M, Vers. II

A9046207

HAND-TERMINAL M, Vers. II Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With frame cover for the use of an aluminium-front panel (accessories)

Supply Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

Chiudi

A9046207

HAND-TERMINAL M, Vers. II
Prodotto aggiunto alla lista
PC+ABS (UL 94 V-0)
off-white RAL 9002
220x120x65mm
IP 65 opt.
A9046209 HAND-TERMINAL M, Vers. II

A9046209

HAND-TERMINAL M, Vers. II Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With frame cover for the use of an aluminium-front panel (accessories)

Supply Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

Chiudi

A9046209

HAND-TERMINAL M, Vers. II
Prodotto aggiunto alla lista
PC+ABS (UL 94 V-0)
black RAL 9005
220x120x65mm
IP 65 opt.
A9073107 DATEC-MOBIL-BOX S, Vers. I

A9073107

DATEC-MOBIL-BOX S, Vers. I Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073107

DATEC-MOBIL-BOX S, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
152x83x33,5mm
IP 65 opt.
A9073109 DATEC-MOBIL-BOX S, Vers. I

A9073109

DATEC-MOBIL-BOX S, Vers. I Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073109

DATEC-MOBIL-BOX S, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
152x83x33,5mm
IP 65 opt.
A9073117 DATEC-MOBIL-BOX S, Vers. I

A9073117

DATEC-MOBIL-BOX S, Vers. I Small hand-held box of attractive design. Without battery compartment. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1,7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073117

DATEC-MOBIL-BOX S, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
152x83x33,5mm
IP 65 opt.
A9073119 DATEC-MOBIL-BOX S, Vers. I

A9073119

DATEC-MOBIL-BOX S, Vers. I Small hand-held box of attractive design. Without battery compartment. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073119

DATEC-MOBIL-BOX S, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
152x83x33,5mm
IP 65 opt.
A9073207 DATEC-MOBIL-BOX S, Vers. II

A9073207

DATEC-MOBIL-BOX S, Vers. II Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073207

DATEC-MOBIL-BOX S, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
152x83x33,5mm
IP 65 opt.
A9073209 DATEC-MOBIL-BOX S, Vers. II

A9073209

DATEC-MOBIL-BOX S, Vers. II Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073209

DATEC-MOBIL-BOX S, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
152x83x33,5mm
IP 65 opt.
A9073217 DATEC-MOBIL-BOX S, Vers. II

A9073217

DATEC-MOBIL-BOX S, Vers. II Small hand-held box of attractive design. Without battery compartment. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073217

DATEC-MOBIL-BOX S, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
152x83x33,5mm
IP 65 opt.
A9073219 DATEC-MOBIL-BOX S, Vers. II

A9073219

DATEC-MOBIL-BOX S, Vers. II Small hand-held box of attractive design. Without battery compartment. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073219

DATEC-MOBIL-BOX S, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
152x83x33,5mm
IP 65 opt.
A9073307 DATEC-MOBIL-BOX S, Vers. III

A9073307

DATEC-MOBIL-BOX S, Vers. III Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073307

DATEC-MOBIL-BOX S, Vers. III
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
152x83x33,5mm
IP 65 opt.
A9073309 DATEC-MOBIL-BOX S, Vers. III

A9073309

DATEC-MOBIL-BOX S, Vers. III Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073309

DATEC-MOBIL-BOX S, Vers. III
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
152x83x33,5mm
IP 65 opt.
A9073317 DATEC-MOBIL-BOX S, Vers. III

A9073317

DATEC-MOBIL-BOX S, Vers. III Small hand-held box of attractive design. Without battery compartment. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply Case-top and base, assembly kit

Chiudi

A9073317

DATEC-MOBIL-BOX S, Vers. III
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
152x83x33,5mm
IP 65 opt.
A9073319 DATEC-MOBIL-BOX S, Vers. III

A9073319

DATEC-MOBIL-BOX S, Vers. III Small hand-held box of attractive design. Without battery compartment. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply Case-top and base, assembly kit

Chiudi

A9073319

DATEC-MOBIL-BOX S, Vers. III
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
152x83x33,5mm
IP 65 opt.
A9073407 DATEC-MOBIL-BOX S, Vers. IV

A9073407

DATEC-MOBIL-BOX S, Vers. IV Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073407

DATEC-MOBIL-BOX S, Vers. IV
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
152x83x33,5mm
IP 65 opt.
A9073409 DATEC-MOBIL-BOX S, Vers. IV

A9073409

DATEC-MOBIL-BOX S, Vers. IV Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9073409

DATEC-MOBIL-BOX S, Vers. IV
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
152x83x33,5mm
IP 65 opt.
A9073417 DATEC-MOBIL-BOX S, Vers. IV

A9073417

DATEC-MOBIL-BOX S, Vers. IV Small hand-held box of attractive design. Without battery compartment. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply Case-top and base, assembly kit

Chiudi

A9073417

DATEC-MOBIL-BOX S, Vers. IV
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
152x83x33,5mm
IP 65 opt.
A9073419 DATEC-MOBIL-BOX S, Vers. IV

A9073419

DATEC-MOBIL-BOX S, Vers. IV Small hand-held box of attractive design. Without battery compartment. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply Case-top and base, assembly kit

Chiudi

A9073419

DATEC-MOBIL-BOX S, Vers. IV
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
152x83x33,5mm
IP 65 opt.
A9074107 DATEC-MOBIL-BOX M, Vers. I

A9074107

DATEC-MOBIL-BOX M, Vers. I Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074107

DATEC-MOBIL-BOX M, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
195x101x44mm
IP 65 opt.
A9074109 DATEC-MOBIL-BOX M, Vers. I

A9074109

DATEC-MOBIL-BOX M, Vers. I Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074109

DATEC-MOBIL-BOX M, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
195x101x44mm
IP 65 opt.
A9074127 DATEC-MOBIL-BOX M, Vers. I, high

A9074127

DATEC-MOBIL-BOX M, Vers. I, high Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top high with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074127

DATEC-MOBIL-BOX M, Vers. I, high
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
195x101x59mm
IP 65 opt.
A9074129 DATEC-MOBIL-BOX M, Vers. I, high

A9074129

DATEC-MOBIL-BOX M, Vers. I, high Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top high with closed operating area, recessed by 1.7 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074129

DATEC-MOBIL-BOX M, Vers. I, high
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
195x101x59mm
IP 65 opt.
A9074207 DATEC-MOBIL-BOX M, Vers. II

A9074207

DATEC-MOBIL-BOX M, Vers. II Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074207

DATEC-MOBIL-BOX M, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
195x101x44mm
IP 65 opt.
A9074209 DATEC-MOBIL-BOX M, Vers. II

A9074209

DATEC-MOBIL-BOX M, Vers. II Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074209

DATEC-MOBIL-BOX M, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
195x101x44mm
IP 65 opt.
A9074227 DATEC-MOBIL-BOX M, Vers. II, high

A9074227

DATEC-MOBIL-BOX M, Vers. II, high Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top high with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074227

DATEC-MOBIL-BOX M, Vers. II, high
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
195x101x59mm
IP 65 opt.
A9074229 DATEC-MOBIL-BOX M, Vers. II, high

A9074229

DATEC-MOBIL-BOX M, Vers. II, high Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top high with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074229

DATEC-MOBIL-BOX M, Vers. II, high
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
195x101x59mm
IP 65 opt.
A9074307 DATEC-MOBIL-BOX M, Vers. III

A9074307

DATEC-MOBIL-BOX M, Vers. III Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for compact-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074307

DATEC-MOBIL-BOX M, Vers. III
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
195x101x44mm
IP 65 opt.
A9074309 DATEC-MOBIL-BOX M, Vers. III

A9074309

DATEC-MOBIL-BOX M, Vers. III Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for compact-LCD modules with 2 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074309

DATEC-MOBIL-BOX M, Vers. III
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
195x101x44mm
IP 65 opt.
A9074407 DATEC-MOBIL-BOX M, Vers. IV

A9074407

DATEC-MOBIL-BOX M, Vers. IV Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for standard-LCD modules with 4 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074407

DATEC-MOBIL-BOX M, Vers. IV
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
195x101x44mm
IP 65 opt.
A9074409 DATEC-MOBIL-BOX M, Vers. IV

A9074409

DATEC-MOBIL-BOX M, Vers. IV Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version Top with display cutout for standard-LCD modules with 4 lines x 16 characters

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9074409

DATEC-MOBIL-BOX M, Vers. IV
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
195x101x44mm
IP 65 opt.
A9075107 DATEC-MOBIL-BOX L, Vers. I

A9075107

DATEC-MOBIL-BOX L, Vers. I Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 2.2 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9075107

DATEC-MOBIL-BOX L, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
252x121x50mm
IP 65 opt.
A9075109 DATEC-MOBIL-BOX L, Vers. I

A9075109

DATEC-MOBIL-BOX L, Vers. I Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 2.2 mm

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9075109

DATEC-MOBIL-BOX L, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
252x121x50mm
IP 65 opt.
A9075117 DATEC-MOBIL-BOX L, Vers. I

A9075117

DATEC-MOBIL-BOX L, Vers. I Hand-held box with wide range of applications without battery compartment. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 2.2 mm

Supply Case-top and base, assembly kit

Chiudi

A9075117

DATEC-MOBIL-BOX L, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
252x121x50mm
IP 65 opt.
A9075119 DATEC-MOBIL-BOX L, Vers. I

A9075119

DATEC-MOBIL-BOX L, Vers. I Hand-held box with wide range of applications without battery compartment. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Sealing for IP 65 as accessory.

Version Top with closed operating area, recessed by 2.2 mm

Supply Case-top and base, assembly kit

Chiudi

A9075119

DATEC-MOBIL-BOX L, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
252x121x50mm
IP 65 opt.
A9075207 DATEC-MOBIL-BOX L, Vers. II

A9075207

DATEC-MOBIL-BOX L, Vers. II Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Sealing for IP 65 as accessory.

Version Top with display cutout for LCD modules of 20 characters x 4 lines

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9075207

DATEC-MOBIL-BOX L, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
252x121x50mm
IP 65 opt.
A9075209 DATEC-MOBIL-BOX L, Vers. II

A9075209

DATEC-MOBIL-BOX L, Vers. II Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery (PP3). Sealing for IP 65 as accessory.

Version Top with display cutout for LCD modules of 20 characters x 4 lines

Supply Case-top and base, battery compartment lid, assembly kit

Chiudi

A9075209

DATEC-MOBIL-BOX L, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
252x121x50mm
IP 65 opt.
A9075217 DATEC-MOBIL-BOX L, Vers. II

A9075217

DATEC-MOBIL-BOX L, Vers. II Hand-held box with wide range of applications without battery compartment. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Sealing for IP 65 as accessory.

Version Top with display cutout for LCD modules of 20 characters x 4 lines

Supply Case-top and base, assembly kit

Chiudi

A9075217

DATEC-MOBIL-BOX L, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
252x121x50mm
IP 65 opt.
A9075219 DATEC-MOBIL-BOX L, Vers. II

A9075219

DATEC-MOBIL-BOX L, Vers. II Hand-held box with wide range of applications without battery compartment. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Sealing for IP 65 as accessory.

Version Top with display cutout for LCD modules of 20 characters x 4 lines

Supply Case-top and base, assembly kit

Chiudi

A9075219

DATEC-MOBIL-BOX L, Vers. II
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
252x121x50mm
IP 65 opt.
A9520165 FLAT-PACK CASE 120 A

A9520165

FLAT-PACK CASE 120 A Two-piece case. The front pane,l see accessory A9195201, rests upon four spring posts and is held without screws by the case frame. Fastenings pillars for PCB mounting.

Supply 1 top and base part, assembly kit

Chiudi

A9520165

FLAT-PACK CASE 120 A
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
120x65x40mm
IP 40
A9530165 FLAT-PACK CASE 150 A

A9530165

FLAT-PACK CASE 150 A Two-piece case. The front panel, see accessory A9195301, rests upon four spring posts and is held without screws by the case frame. Fastenings pillars for PCB mounting.

Supply 1 top and base part, assembly kit

Chiudi

A9530165

FLAT-PACK CASE 150 A
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
150x85x45mm
IP 40
A9540165 FLAT-PACK CASE 210 A

A9540165

FLAT-PACK CASE 210 A Two-piece case. The front panel, see accessory A9195401, rests upon four spring posts and is held without screws by the case frame. Fastenings pillars for PCB mounting.

Supply 1 top and base part, assembly kit

Chiudi

A9540165

FLAT-PACK CASE 210 A
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
210x125x70mm
IP 40
C0080801 Case shell 80, with groove

C0080801

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C0080801

Case shell 80, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
80x80x20mm
C0080802 Case shell 80, with groove

C0080802

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C0080802

Case shell 80, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
80x80x20mm
C0081201 Case shell 80, with groove

C0081201

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C0081201

Case shell 80, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x80x20mm
C0081202 Case shell 80, with groove

C0081202

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C0081202

Case shell 80, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x80x20mm
C0081601 Case shell 80, with groove

C0081601

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C0081601

Case shell 80, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x80x20mm
C0081602 Case shell 80, with groove

C0081602

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C0081602

Case shell 80, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x80x20mm
C0082401 Case shell 80, with groove

C0082401

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C0082401

Case shell 80, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x80x20mm
C0082402 Case shell 80, with groove

C0082402

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C0082402

Case shell 80, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x80x20mm
C0121201 Case shell 120, with tongue

C0121201

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0121201

Case shell 120, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x120x30mm
C0121202 Case shell 120, with tongue

C0121202

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0121202

Case shell 120, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x120x30mm
C0122001 Case shell 120, with tongue

C0122001

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0122001

Case shell 120, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
200x120x30mm
C0122002 Case shell 120, with tongue

C0122002

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0122002

Case shell 120, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
200x120x30mm
C0122401 Case shell 120, with tongue

C0122401

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0122401

Case shell 120, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x120x30mm
C0122402 Case shell 120, with tongue

C0122402

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0122402

Case shell 120, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x120x30mm
C0161601 Case shell 160, with tongue

C0161601

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0161601

Case shell 160, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x160x30mm
C0161602 Case shell 160, with tongue

C0161602

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0161602

Case shell 160, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x160x30mm
C0162401 Case shell 160, with tongue

C0162401

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0162401

Case shell 160, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x160x30mm
C0162402 Case shell 160, with tongue

C0162402

Case shell 160, with tongue Case shell with thread and fixing towers as separate part.´Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C0162402

Case shell 160, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x160x30mm
C1080801 Case shell 80, with tongue

C1080801

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1080801

Case shell 80, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
80x80x40mm
C1080802 Case shell 80, with tongue

C1080802

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1080802

Case shell 80, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
80x80x40mm
C1081201 Case shell 80, with tongue

C1081201

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1081201

Case shell 80, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x80x40mm
C1081202 Case shell 80, with tongue

C1081202

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1081202

Case shell 80, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x80x40mm
C1081601 Case shell 80, with tongue

C1081601

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1081601

Case shell 80, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x80x40mm
C1081602 Case shell 80, with tongue

C1081602

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1081602

Case shell 80, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x80x40mm
C1082401 Case shell 80, with tongue

C1082401

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1082401

Case shell 80, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x80x40mm
C1082402 Case shell 80, with tongue

C1082402

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1082402

Case shell 80, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x80x40mm
C1121201 Case shell 120, with groove

C1121201

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1121201

Case shell 120, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x120x30mm
C1121202 Case shell 120, with groove

C1121202

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1121202

Case shell 120, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x120x30mm
C1122001 Case shell 120, with groove

C1122001

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1122001

Case shell 120, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
200x120x30mm
C1122002 Case shell 120, with groove

C1122002

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1122002

Case shell 120, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
200x120x30mm
C1122401 Case shell 120, with groove

C1122401

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1122401

Case shell 120, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x120x30mm
C1122402 Case shell 120, with groove

C1122402

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1122402

Case shell 120, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x120x30mm
C1161601 Case shell 160, with groove

C1161601

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1161601

Case shell 160, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x160x30mm
C1161602 Case shell 160, with groove

C1161602

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1161602

Case shell 160, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x160x30mm
C1162401 Case shell 160, with groove

C1162401

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1162401

Case shell 160, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x160x30mm
C1162402 Case shell 160, with groove

C1162402

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C1162402

Case shell 160, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x160x30mm
C1203001 Case shell 200, with tongue

C1203001

Case shell 200, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1203001

Case shell 200, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
300x200x40mm
C1243601 Case shell 240, with tongue

C1243601

Case shell 240, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C1243601

Case shell 240, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
360x240x40mm
C2008081 ROBUST-BOX WIDTH 80, Vers. I

C2008081

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealeing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2008081

ROBUST-BOX WIDTH 80, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
80x80x60mm
IP 66
C2008082 ROBUST-BOX WIDTH 80, Vers. II

C2008082

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2008082

ROBUST-BOX WIDTH 80, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
80x80x60mm
IP 66
C2008121 ROBUST-BOX WIDTH 80, Vers. I

C2008121

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2008121

ROBUST-BOX WIDTH 80, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x80x60mm
IP 66
C2008122 ROBUST-BOX WIDTH 80, Vers. II

C2008122

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2008122

ROBUST-BOX WIDTH 80, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x80x60mm
IP 66
C2008161 ROBUST-BOX WIDTH 80, Vers. I

C2008161

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2008161

ROBUST-BOX WIDTH 80, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x80x60mm
IP 66
C2008162 ROBUST-BOX WIDTH 80, Vers. II

C2008162

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2008162

ROBUST-BOX WIDTH 80, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x80x60mm
IP 66
C2008241 ROBUST-BOX WIDTH 80, Vers. I

C2008241

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2008241

ROBUST-BOX WIDTH 80, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x80x60mm
IP 66
C2008242 ROBUST-BOX WIDTH 80, Vers. II

C2008242

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2008242

ROBUST-BOX WIDTH 80, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x80x60mm
IP 66
C2012121 ROBUST-BOX WIDTH 120, Vers. I

C2012121

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2012121

ROBUST-BOX WIDTH 120, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x120x60mm
IP 66
C2012122 ROBUST-BOX WIDTH 120, Vers. II

C2012122

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2012122

ROBUST-BOX WIDTH 120, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x120x60mm
IP 66
C2012201 ROBUST-BOX WIDTH 120, Vers. I

C2012201

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2012201

ROBUST-BOX WIDTH 120, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
200x120x60mm
IP 66
C2012202 ROBUST-BOX WIDTH 120, Vers. II

C2012202

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2012202

ROBUST-BOX WIDTH 120, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
200x120x60mm
IP 66
C2012241 ROBUST-BOX WIDTH 120, Vers. I

C2012241

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2012241

ROBUST-BOX WIDTH 120, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x120x60mm
IP 66
C2012242 ROBUST-BOX WIDTH 120, Vers, II

C2012242

ROBUST-BOX WIDTH 120, Vers, II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2012242

ROBUST-BOX WIDTH 120, Vers, II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x120x60mm
IP 66
C2016161 ROBUST-BOX WIDTH 160, Vers. I

C2016161

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2016161

ROBUST-BOX WIDTH 160, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x160x60mm
IP 66
C2016162 ROBUST-BOX WIDTH 160, Vers. II

C2016162

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2016162

ROBUST-BOX WIDTH 160, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x160x60mm
IP 66
C2016241 ROBUST-BOX WIDTH 160, Vers. I

C2016241

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2016241

ROBUST-BOX WIDTH 160, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x160x60mm
IP 66
C2016242 ROBUST-BOX WIDTH 160, Vers. II

C2016242

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2016242

ROBUST-BOX WIDTH 160, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x160x60mm
IP 66
C2080801 Case shell 80, with groove

C2080801

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2080801

Case shell 80, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
80x80x40mm
C2080802 Case shell 80, with groove

C2080802

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2080802

Case shell 80, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
80x80x40mm
C2081201 Case shell 80, with groove

C2081201

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2081201

Case shell 80, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x80x40mm
C2081202 Case shell 80, with groove

C2081202

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2081202

Case shell 80, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x80x40mm
C2081601 Case shell 80, with groove

C2081601

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2081601

Case shell 80, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x80x40mm
C2081602 Case shell 80, with groove

C2081602

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2081602

Case shell 80, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x80x40mm
C2082401 Case shell 80, with groove

C2082401

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2082401

Case shell 80, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x80x40mm
C2082402 Case shell 80, with groove

C2082402

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2082402

Case shell 80, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x80x40mm
C2108081 ROBUST-BOX WIDTH 80, Vers. I

C2108081

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and botttom, assembly kit

Chiudi

C2108081

ROBUST-BOX WIDTH 80, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
80x80x80mm
IP 66
C2108082 ROBUST-BOX WIDTH 80, Vers. II

C2108082

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2108082

ROBUST-BOX WIDTH 80, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
80x80x80mm
IP 66
C2108121 ROBUST-BOX WIDTH 80, Vers. I

C2108121

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2108121

ROBUST-BOX WIDTH 80, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x80x80mm
IP 66
C2108122 ROBUST-BOX WIDTH 80, Vers. II

C2108122

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2108122

ROBUST-BOX WIDTH 80, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x80x80mm
IP 66
C2108161 ROBUST-BOX WIDTH 80, Vers. I

C2108161

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2108161

ROBUST-BOX WIDTH 80, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x80x80mm
IP 66
C2108162 ROBUST-BOX WIDTH 80, Vers. II

C2108162

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2108162

ROBUST-BOX WIDTH 80, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x80x80mm
IP 66
C2108241 ROBUST-BOX WIDTH 80, Vers. I

C2108241

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2108241

ROBUST-BOX WIDTH 80, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x80x80mm
IP 66
C2108242 ROBUST-BOX WIDTH 80, Vers. II

C2108242

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2108242

ROBUST-BOX WIDTH 80, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x80x80mm
IP 66
C2112121 ROBUST-BOX WIDTH 120, Vers. I

C2112121

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2112121

ROBUST-BOX WIDTH 120, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x120x90mm
IP 66
C2112122 ROBUST-BOX WIDTH 120, Vers. II

C2112122

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2112122

ROBUST-BOX WIDTH 120, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x120x90mm
IP 66
C2112201 ROBUST-BOX WIDTH 120, Vers. I

C2112201

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2112201

ROBUST-BOX WIDTH 120, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
200x120x90mm
IP 66
C2112202 ROBUST-BOX WIDTH 120, Vers. II

C2112202

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2112202

ROBUST-BOX WIDTH 120, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
200x120x90mm
IP 66
C2112241 ROBUST-BOX WIDTH 120, Vers. I

C2112241

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2112241

ROBUST-BOX WIDTH 120, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x120x90mm
IP 66
C2112242 ROBUST-BOX WIDTH 120, Vers. II

C2112242

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2112242

ROBUST-BOX WIDTH 120, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x120x90mm
IP 66
C2116161 ROBUST-BOX WIDTH 160, Vers. I

C2116161

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2116161

ROBUST-BOX WIDTH 160, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x160x90mm
IP 66
C2116162 ROBUST-BOX WIDTH 160, Vers. II

C2116162

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2116162

ROBUST-BOX WIDTH 160, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x160x90mm
IP 66
C2116241 ROBUST-BOX WIDTH 160, Vers. I

C2116241

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2116241

ROBUST-BOX WIDTH 160, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x160x90mm
IP 66
C2116242 ROBUST-BOX WIDTH 160, Vers. II

C2116242

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2116242

ROBUST-BOX WIDTH 160, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x160x90mm
IP 66
C2120301 ROBUST-BOX WIDTH 200, Vers. I

C2120301

ROBUST-BOX WIDTH 200, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2120301

ROBUST-BOX WIDTH 200, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
300x200x80mm
IP 66
C2121201 Case shell 120, with tongue

C2121201

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2121201

Case shell 120, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
120x120x60mm
C2121202 Case shell 120, with tongue

C2121202

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2121202

Case shell 120, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
120x120x60mm
C2122001 Case shell 120, with tongue

C2122001

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2122001

Case shell 120, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
200x120x60mm
C2122002 Case shell 120, with tongue

C2122002

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2122002

Case shell 120, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
200x120x60mm
C2122401 Case shell 120, with tongue

C2122401

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2122401

Case shell 120, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x120x60mm
C2122402 Case shell 120, with tongue

C2122402

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2122402

Case shell 120, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x120x60mm
C2124361 ROBUST-BOX WIDTH 240, Vers. I

C2124361

ROBUST-BOX WIDTH 240, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2124361

ROBUST-BOX WIDTH 240, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
360x240x80mm
IP 66
C2161601 Case shell 160, with tongue

C2161601

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2161601

Case shell 160, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
160x160x60mm
C2161602 Case shell 160, with tongue

C2161602

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2161602

Case shell 160, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
160x160x60mm
C2162401 Case shell 160, with tongue

C2162401

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2162401

Case shell 160, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x160x60mm
C2162402 Case shell 160, with tongue

C2162402

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C2162402

Case shell 160, with tongue
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x160x60mm
C2203001 Case shell 200, with groove

C2203001

Case shell 200, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2203001

Case shell 200, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
300x200x40mm
C2243601 Case shell 240, with groove

C2243601

Case shell 240, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C2243601

Case shell 240, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
360x240x40mm
C2416241 ROBUST-BOX WIDTH 160, Vers. I

C2416241

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2416241

ROBUST-BOX WIDTH 160, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x160x120mm
IP 66
C2416242 ROBUST-BOX WIDTH 160, Vers. II

C2416242

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2416242

ROBUST-BOX WIDTH 160, Vers. II
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x160x120mm
IP 66
C2420301 ROBUST-BOX WIDTH 200, Vers. I

C2420301

ROBUST-BOX WIDTH 200, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2420301

ROBUST-BOX WIDTH 200, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
300x200x120mm
IP 66
C2424361 ROBUST-BOX WIDTH 240, Vers. I

C2424361

ROBUST-BOX WIDTH 240, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2424361

ROBUST-BOX WIDTH 240, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
360x240x120mm
IP 66
C2520301 ROBUST-BOX WIDTH 200, Vers. I

C2520301

ROBUST-BOX WIDTH 200, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Lid fixing outside of sealed area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2520301

ROBUST-BOX WIDTH 200, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
300x200x160mm
IP 66
C2524361 ROBUST-BOX WIDTH 240, Vers. I

C2524361

ROBUST-BOX WIDTH 240, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Chiudi

C2524361

ROBUST-BOX WIDTH 240, Vers. I
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
360x240x160mm
IP 66
C3162401 Case shell 160, with groove

C3162401

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C3162401

Case shell 160, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
240x160x60mm
C3162402 Case shell 160, with groove

C3162402

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C3162402

Case shell 160, with groove
Prodotto aggiunto alla lista
PC (UL 94 HB)
light grey RAL 7035
240x160x60mm
C4203001 Case shell 200, with tongue

C4203001

Case shell 200, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C4203001

Case shell 200, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
300x200x80mm
C4243601 Case shell 240, with tongue

C4243601

Case shell 240, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Chiudi

C4243601

Case shell 240, with tongue
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
360x240x80mm
C5203001 Case shell 200, with groove

C5203001

Case shell 200, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C5203001

Case shell 200, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
300x200x80mm
C5243601 Case shell 240, with groove

C5243601

Case shell 240, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Chiudi

C5243601

Case shell 240, with groove
Prodotto aggiunto alla lista
ABS (UL 94 HB)
light grey RAL 7035
360x240x80mm
C6009121 SMART-BOX WIDTH 90

C6009121

SMART-BOX WIDTH 90 Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Chiudi

C6009121

SMART-BOX WIDTH 90
Prodotto aggiunto alla lista
ASA+PC (UL 94 V-0)
light grey RAL 7035
120x90x50mm
IP 66
C6009161 SMART-BOX WIDTH 90

C6009161

SMART-BOX WIDTH 90 Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Chiudi

C6009161

SMART-BOX WIDTH 90
Prodotto aggiunto alla lista
ASA+PC (UL 94 V-0)
light grey RAL 7035
160x90x50mm
IP 66
C6011141 SMART-BOX WIDTH 110

C6011141

SMART-BOX WIDTH 110 Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Chiudi

C6011141

SMART-BOX WIDTH 110
Prodotto aggiunto alla lista
ASA+PC (UL 94 V-0)
light grey RAL 7035
140x110x60mm
IP 66
C6011201 SMART-BOX WIDTH 110

C6011201

SMART-BOX WIDTH 110 Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Chiudi

C6011201

SMART-BOX WIDTH 110
Prodotto aggiunto alla lista
ASA+PC (UL 94 V-0)
light grey RAL 7035
200x110x60mm
IP 66
C6013161 SMART-BOX WIDTH 130

C6013161

SMART-BOX WIDTH 130 Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Chiudi

C6013161

SMART-BOX WIDTH 130
Prodotto aggiunto alla lista
ASA+PC (UL 94 V-0)
light grey RAL 7035
160x130x60mm
IP 66
C6013221 SMART-BOX WIDTH 130

C6013221

SMART-BOX WIDTH 130 Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Chiudi

C6013221

SMART-BOX WIDTH 130
Prodotto aggiunto alla lista
ASA+PC (UL 94 V-0)
light grey RAL 7035
220x130x60mm
IP 66
C6015181 SMART-BOX WIDTH 150

C6015181

SMART-BOX WIDTH 150 Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims (hinged), assembly kit incl. cover retention

Chiudi

C6015181

SMART-BOX WIDTH 150
Prodotto aggiunto alla lista
ASA+PC (UL 94 V-0)
light grey RAL 7035
180x150x60mm
IP 66
C6017281 SMART-BOX WIDTH 170

C6017281

SMART-BOX WIDTH 170 Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Chiudi

C6017281

SMART-BOX WIDTH 170
Prodotto aggiunto alla lista
ASA+PC (UL 94 V-0)
light grey RAL 7035
280x170x60mm
IP 65
  • Dati tecnici
  • Purchasing Data
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
0,5 g
Customs tariff number
(OKW product)
73181499
Country of manufacture
Germany