Minimalna ilość komponentów do skompletowania obudowy:
1 dolna i górna część R110.
1 pokrywa / pokrywa pojemnika baterii / podstawa / podstawa 30 ° lub podstawa 55 ° (w zależności od wersji dolnej części i korzystania z pojemnika baterii).
System components to complete
B5010007
Bottom and top part R110 F
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version
Bottom part "level"
Supply
1 top and bottom part R110 F, assembly kit
Zamknij
Bottom and top part R110 F
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
⌀110x30mm
B5010107
Bottom and top part R110 H
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version
Bottom part "level"
Supply
1 top and bottom part R110 H, assembly kit
Zamknij
Bottom and top part R110 H
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
⌀110x38mm
B5010207
Bottom and top part R110 F
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part R110 F, assembly kit
Zamknij
Bottom and top part R110 F
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
⌀110x38mm
B5010307
Bottom and top part R110 H
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part R110 H, assembly kit
Zamknij
Bottom and top part R110 H
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
⌀110x41mm
Accessory "wall/holder"
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply
Wall mounting set, incl. safety screw
Zamknij
Wall mounting set
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "screws"
B5111201
Set of screws
Screw kit for mounting PCBs. Diameter 2.5 x 5 mm, type PZ1.
Supply
4 screws
Zamknij
Set of screws
produkt został dodany do twojej listy
Accessory
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply
2 rubber feet
Zamknij
Anti-slide feet 6.5 x 2 mm
produkt został dodany do twojej listy
transparent
Minimalna ilość komponentów do skompletowania obudowy:
1 dolna i górna część S110.
1 pokrywa / pokrywa pojemnika baterii / podstawa / podstawa 30 ° lub podstawa 55 ° (w zależności od wersji dolnej części i korzystania z pojemnika baterii).
System components to complete
B5012207
Bottom and top part S110F
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30°or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclinded"
Supply
1 top and bottom part S110 F, assembly kit
Zamknij
Bottom and top part S110F
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
110x110x38mm
Accessory "wall/holder"
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply
Wall mounting set, incl. safety screw
Zamknij
Wall mounting set
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "screws"
B5111201
Set of screws
Screw kit for mounting PCBs. Diameter 2.5 x 5 mm, type PZ1.
Supply
4 screws
Zamknij
Set of screws
produkt został dodany do twojej listy
Accessory
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply
2 rubber feet
Zamknij
Anti-slide feet 6.5 x 2 mm
produkt został dodany do twojej listy
transparent
Minimalna ilość komponentów do skompletowania obudowy:
1 dolna i górna część O160.
1 pokrywa / pokrywa pojemnika baterii / podstawa / podstawa 30 ° lub podstawa 55 ° (w zależności od wersji dolnej części i korzystania z pojemnika baterii).
System components to complete
B5015007
Bottom and top part O160 F
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version
Bottom part "level"
Supply
1 top and bottom part O160 F, assembly kit
Zamknij
Bottom and top part O160 F
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
160x110x30mm
B5015107
Bottom and top part O160 H
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version
Bottom part "level"
Supply
1 top and bottom part O160 H, assembly kit
Zamknij
Bottom and top part O160 H
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
160x110x38mm
B5015207
Bottom and top part O160 F
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part O160 F, assembly kit
Zamknij
Bottom and top part O160 F
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
160x110x38mm
B5015307
Bottom and top part O160 H
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part O160 H, assembly kit
Zamknij
Bottom and top part O160 H
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
160x110x41mm
Accessory "wall/holder"
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply
Wall mounting set, incl. safety screw
Zamknij
Wall mounting set
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "screws"
B5111201
Set of screws
Screw kit for mounting PCBs. Diameter 2.5 x 5 mm, type PZ1.
Supply
4 screws
Zamknij
Set of screws
produkt został dodany do twojej listy
Accessory
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply
2 rubber feet
Zamknij
Anti-slide feet 6.5 x 2 mm
produkt został dodany do twojej listy
transparent
Minimalna ilość komponentów do skompletowania obudowy:
1 dolna i górna część E160.
1 pokrywa / pokrywa pojemnika baterii / podstawa / podstawa 30 ° lub podstawa 55 ° (w zależności od wersji dolnej części i korzystania z pojemnika baterii).
System components to complete
B5017207
Bottom and top part E160 F
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part E160 F, assembly kit
Zamknij
Bottom and top part E160 F
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
160x110x38mm
Accessory "wall/holder"
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply
Wall mounting set, incl. safety screw
Zamknij
Wall mounting set
produkt został dodany do twojej listy
ABS
(UL 94 HB)
off-white RAL 9002
Accessory "screws"
B5111201
Set of screws
Screw kit for mounting PCBs. Diameter 2.5 x 5 mm, type PZ1.
Supply
4 screws
Zamknij
Set of screws
produkt został dodany do twojej listy
Accessory
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply
2 rubber feet
Zamknij
Anti-slide feet 6.5 x 2 mm
produkt został dodany do twojej listy
transparent
Opcje dostosowywania dla B5011847
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
Akcesoria do obudów
Dodaj do koszyka 
