至少组件
1 个上盒和下盒 R110.
1 个底盖 / 电池盒盖 / 底座 / 底座 30° 或 底座 55° (取决于下部和电池盒插入件的结构设计).
系统组件使产品完整
B5010007
Bottom and top part R110 F
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version
Bottom part "level"
Supply
1 top and bottom part R110 F, assembly kit
关闭
Bottom and top part R110 F
ABS
(UL 94 HB)
off-white RAL 9002
⌀110x30mm
B5010107
Bottom and top part R110 H
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version
Bottom part "level"
Supply
1 top and bottom part R110 H, assembly kit
关闭
Bottom and top part R110 H
ABS
(UL 94 HB)
off-white RAL 9002
⌀110x38mm
B5010207
Bottom and top part R110 F
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part R110 F, assembly kit
关闭
Bottom and top part R110 F
ABS
(UL 94 HB)
off-white RAL 9002
⌀110x38mm
B5010307
Bottom and top part R110 H
Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part R110 H, assembly kit
关闭
Bottom and top part R110 H
ABS
(UL 94 HB)
off-white RAL 9002
⌀110x41mm
“电池” 配件
A9190002
Set of battery clips, 2xN/2xAA/2xAAA
For contacting the batteries.
Note application ART-CASE: only for base suitable (2 x AA).
Supply
1 double contact, 2 single contacts
关闭
Set of battery clips, 2xN/2xAA/2xAAA
Steel
tin-plated
“保护等级” 附件
A9199005
Strain relief
Frame for securing the cable on existing supports. Suitable for cable ø approx. 5-7 mm.
Supply
1 strain relief device, 2 screws
关闭
Strain relief
PA 6
volcano
B5111707
Anti-rotation device
To prevent the base from being removed.
Supply
Anti-rotation device, incl. screws
关闭
Anti-rotation device
ABS
(UL 94 HB)
off-white RAL 9002
“挂墙支架” 配件
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply
Wall mounting set, incl. safety screw
关闭
Wall mounting set
ABS
(UL 94 HB)
off-white RAL 9002
“螺钉” 附件
B5111201
Set of screws
Screw kit for mounting PCBs. Diameter 2.5 x 5 mm, type PZ1.
Supply
4 screws
关闭
Set of screws
附件
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply
2 rubber feet
关闭
Anti-slide feet 6.5 x 2 mm
transparent
至少组件
1 个上盒和下盒 S110.
1 个底盖 / 电池盒盖 / 底座 / 底座 30° 或 底座 55° (取决于下部和电池盒插入件的结构设计).
系统组件使产品完整
B5012207
Bottom and top part S110F
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30°or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclinded"
Supply
1 top and bottom part S110 F, assembly kit
关闭
Bottom and top part S110F
ABS
(UL 94 HB)
off-white RAL 9002
110x110x38mm
“电池” 配件
A9190002
Set of battery clips, 2xN/2xAA/2xAAA
For contacting the batteries.
Note application ART-CASE: only for base suitable (2 x AA).
Supply
1 double contact, 2 single contacts
关闭
Set of battery clips, 2xN/2xAA/2xAAA
Steel
tin-plated
“保护等级” 附件
A9199005
Strain relief
Frame for securing the cable on existing supports. Suitable for cable ø approx. 5-7 mm.
Supply
1 strain relief device, 2 screws
关闭
Strain relief
PA 6
volcano
B5111707
Anti-rotation device
To prevent the base from being removed.
Supply
Anti-rotation device, incl. screws
关闭
Anti-rotation device
ABS
(UL 94 HB)
off-white RAL 9002
“挂墙支架” 配件
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply
Wall mounting set, incl. safety screw
关闭
Wall mounting set
ABS
(UL 94 HB)
off-white RAL 9002
“螺钉” 附件
B5111201
Set of screws
Screw kit for mounting PCBs. Diameter 2.5 x 5 mm, type PZ1.
Supply
4 screws
关闭
Set of screws
附件
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply
2 rubber feet
关闭
Anti-slide feet 6.5 x 2 mm
transparent
至少组件
1 个上盒和下盒 O160.
1 个底盖 / 电池盒盖 / 底座 / 底座 30° 或 底座 55° (取决于下部和电池盒插入件的结构设计).
系统组件使产品完整
B5015007
Bottom and top part O160 F
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version
Bottom part "level"
Supply
1 top and bottom part O160 F, assembly kit
关闭
Bottom and top part O160 F
ABS
(UL 94 HB)
off-white RAL 9002
160x110x30mm
B5015107
Bottom and top part O160 H
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.
Version
Bottom part "level"
Supply
1 top and bottom part O160 H, assembly kit
关闭
Bottom and top part O160 H
ABS
(UL 94 HB)
off-white RAL 9002
160x110x38mm
B5015207
Bottom and top part O160 F
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part O160 F, assembly kit
关闭
Bottom and top part O160 F
ABS
(UL 94 HB)
off-white RAL 9002
160x110x38mm
B5015307
Bottom and top part O160 H
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part O160 H, assembly kit
关闭
Bottom and top part O160 H
ABS
(UL 94 HB)
off-white RAL 9002
160x110x41mm
“电池” 配件
A9190002
Set of battery clips, 2xN/2xAA/2xAAA
For contacting the batteries.
Note application ART-CASE: only for base suitable (2 x AA).
Supply
1 double contact, 2 single contacts
关闭
Set of battery clips, 2xN/2xAA/2xAAA
Steel
tin-plated
“保护等级” 附件
A9199005
Strain relief
Frame for securing the cable on existing supports. Suitable for cable ø approx. 5-7 mm.
Supply
1 strain relief device, 2 screws
关闭
Strain relief
PA 6
volcano
B5111707
Anti-rotation device
To prevent the base from being removed.
Supply
Anti-rotation device, incl. screws
关闭
Anti-rotation device
ABS
(UL 94 HB)
off-white RAL 9002
“挂墙支架” 配件
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply
Wall mounting set, incl. safety screw
关闭
Wall mounting set
ABS
(UL 94 HB)
off-white RAL 9002
“螺钉” 附件
B5111201
Set of screws
Screw kit for mounting PCBs. Diameter 2.5 x 5 mm, type PZ1.
Supply
4 screws
关闭
Set of screws
附件
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply
2 rubber feet
关闭
Anti-slide feet 6.5 x 2 mm
transparent
至少组件
1 个上盒和下盒 E160.
1 个底盖 / 电池盒盖 / 底座 / 底座 30° 或 底座 55° (取决于下部和电池盒插入件的结构设计).
系统组件使产品完整
B5017207
Bottom and top part E160 F
Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.
Version
Bottom part "inclined"
Supply
1 top and bottom part E160 F, assembly kit
关闭
Bottom and top part E160 F
ABS
(UL 94 HB)
off-white RAL 9002
160x110x38mm
“电池” 配件
A9190002
Set of battery clips, 2xN/2xAA/2xAAA
For contacting the batteries.
Note application ART-CASE: only for base suitable (2 x AA).
Supply
1 double contact, 2 single contacts
关闭
Set of battery clips, 2xN/2xAA/2xAAA
Steel
tin-plated
“保护等级” 附件
A9199005
Strain relief
Frame for securing the cable on existing supports. Suitable for cable ø approx. 5-7 mm.
Supply
1 strain relief device, 2 screws
关闭
Strain relief
PA 6
volcano
B5111707
Anti-rotation device
To prevent the base from being removed.
Supply
Anti-rotation device, incl. screws
关闭
Anti-rotation device
ABS
(UL 94 HB)
off-white RAL 9002
“挂墙支架” 配件
B5111307
Wall mounting set
Suitable for all versions (except Euro Plug version), for secure wall mounting of the enclosures (machining lid/bases necessary).
Supply
Wall mounting set, incl. safety screw
关闭
Wall mounting set
ABS
(UL 94 HB)
off-white RAL 9002
“螺钉” 附件
B5111201
Set of screws
Screw kit for mounting PCBs. Diameter 2.5 x 5 mm, type PZ1.
Supply
4 screws
关闭
Set of screws
附件
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply
2 rubber feet
关闭
Anti-slide feet 6.5 x 2 mm
transparent
Customising options for B5011117
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
DIN 标准导轨接线盒
添加到购物车内 
