至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 个电池盒及盒盖
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板).
1 个电池盒及盒盖.
系统组件使产品完整
B4046707
Bottom part L flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part flat
关闭
Bottom part L flat, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
B4046757
Bottom part L high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part high
关闭
Bottom part L high, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.
B4146047
Battery compartment and lid L, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
关闭
Battery compartment and lid L, 5 x AA
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 块底板带手槽
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板).
1 块带手槽 底板
系统组件使产品完整
B4046707
Bottom part L flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part flat
关闭
Bottom part L flat, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
B4046757
Bottom part L high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part high
关闭
Bottom part L high, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.
B4146167
Bottom panel with handle recess L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
关闭
Bottom panel with handle recess L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 个电池盒及盒盖或 带手槽底板
1 充电站 – 底座、机盒放置架 –
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1 个电池盒及盒盖或带手槽底板
1 充电站 – 底座、机盒放置架 –
系统组件使产品完整
B4046707
Bottom part L flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part flat
关闭
Bottom part L flat, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
B4046757
Bottom part L high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part high
关闭
Bottom part L high, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.
B4046837
Base L - charging station, case deposit mobile
Assembly unit: Suitable for case with battery compartment or bottom panel with handle recess. Ergonomically designed for desktop and for wall mounting favorable. Can be equipped either for installing the case for desktop applications or with a snap-in mechanism for secure wall mounted and desktop applications. Case position vertically or horizontally, depending on the application - see assembly instruction. Contacts for simple data and charging current transfer as accessories.
Supply
1 base, 1 base cover, 2 covers, assembly kit
关闭
Base L - charging station, case deposit mobile
ABS
(UL 94 HB)
off-white RAL 9002
183x183x80mm
B4146047
Battery compartment and lid L, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
关闭
Battery compartment and lid L, 5 x AA
ABS
(UL 94 HB)
off-white RAL 9002
B4146167
Bottom panel with handle recess L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
关闭
Bottom panel with handle recess L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 个电池盒及盒盖或 1块带手槽底板
1 个挂墙安装支架
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1 个电池盒及盒盖或1块带手槽底板
1 个挂墙安装支架
系统组件使产品完整
B4046707
Bottom part L flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part flat
关闭
Bottom part L flat, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
B4046757
Bottom part L high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part high
关闭
Bottom part L high, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.
B4146047
Battery compartment and lid L, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
关闭
Battery compartment and lid L, 5 x AA
ABS
(UL 94 HB)
off-white RAL 9002
B4146167
Bottom panel with handle recess L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
关闭
Bottom panel with handle recess L
ABS
(UL 94 HB)
off-white RAL 9002
B4146247
Wall suspension element L
Hidden wall mounting. While closed, the entire case (version with battery compartment or base plate with handle recess) can be mounted on the wall, fixed and also removed again by means of the wall suspension element.
Supply
1 wall suspension element with snap-in mechanism
关闭
Wall suspension element L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 个底座 – 倾斜坐 –
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1 个底座 – 倾斜坐 –
系统组件使产品完整
B4046707
Bottom part L flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part flat
关闭
Bottom part L flat, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
B4046757
Bottom part L high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part high
关闭
Bottom part L high, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.
B4046827
Base L - desk-top -
Assembly unit: for case combinations with open bottom part vers. I or II. Case screwed to base. Assembly screws hidden from view. Ergonomically designed for operating and reading off. Assembly of the operating panel vertically or horizontally, depending on the application, see assembly instruction.
Supply
1 base, 2 covers, assembly kit
关闭
Base L - desk-top -
ABS
(UL 94 HB)
off-white RAL 9002
183x183x73mm
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1块带卡扣条底板
1 个底座 – 倾斜坐 / 墙挂坐 –
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1块带卡扣条底板
1 个底座 – 倾斜坐 / 墙挂坐 –
系统组件使产品完整
B4046707
Bottom part L flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part flat
关闭
Bottom part L flat, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
B4046757
Bottom part L high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part high
关闭
Bottom part L high, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.
B4046847
Base L - desk-top/wall -
Assembly unit: for case combinations with bottom panel and snap-in strips. Case snaps into the base in vertical or horizontal position, depending on the application - see assembly instruction. If required, unit can be secured by latch lock. Ergonomically designed for operating and reading off. Direct wall mounting.
Supply
1 base, 2 clips, assembly kit
关闭
Base L - desk-top/wall -
ABS
(UL 94 HB)
off-white RAL 9002
183x183x73mm
B4146257
Bottom panel with snap-in strips L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, 2 snap-in strips, assembly kit
关闭
Bottom panel with snap-in strips L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒)
1 块底板
1 套安装组件
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1 块底板
1 套安装组件
系统组件使产品完整
B4046707
Bottom part L flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part flat
关闭
Bottom part L flat, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x26.5mm
IP 54 opt.
B4046757
Bottom part L high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version
Suitable for mounting cover or aluminium front panel (sep. article)
Supply
1 bottom part high
关闭
Bottom part L high, version I
ABS
(UL 94 HB)
off-white RAL 9002
275x195x36.5mm
IP 54 opt.
B4146257
Bottom panel with snap-in strips L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, 2 snap-in strips, assembly kit
关闭
Bottom panel with snap-in strips L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
Customising options for B4146126
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
DIN 标准导轨接线盒
添加到购物车内 
