请选择所需的产品类型或尺寸，或点击产品列表末尾的“选择所有产品”按键。
A9100002
Ring eyelet
For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 4 mm, location hole ø 5 mm required.
Supply
1 ring eyelet
关闭
Ring eyelet
PA 6
volcano
A9160003
Plug-in contact, 1 x 9 V (PP3)
Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).
Supply
1 plug-in contact
关闭
Plug-in contact, 1 x 9 V (PP3)
A9174006
Set of battery clips, 1 x 9 V
For contacting the battery.
Supply
2 single contacts
关闭
Set of battery clips, 1 x 9 V
Steel
tin-plated
A9176001
Display window XS
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply
1 display window, 1 adhesive foil
关闭
Display window XS
Acrylglas
clear
A9176006
Sealing kit XS
Application: for increasing the protection class, of DATEC-CONTROL XS.
Supply
1 sealing kit
关闭
Sealing kit XS
A9176007
Set of battery clips, 2 x AA
For contacting the batteries. For secure hold of the round cells just glue the attached battery spacer into the enclosure’s battery compartment lid.
Supply
2 single contacts, 1 double contacts, 1 self-adhesive battery spacer
关闭
Set of battery clips, 2 x AA
Steel
nickel-plated
A9176008
Set of battery clips, 3 x AA
For contacting the batteries. For secure hold of the round cells just glue the attached battery spacer into the enclosure’s battery compartment lid.
Supply
1 set incl. 1 self-adhesive battery spacer
关闭
Set of battery clips, 3 x AA
Steel
nickel-plated
A9176108
Protector XS
Special protector for DATEC-CONTROL XS. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Supply
1 protector
关闭
Protector XS
SBS (TPE)
volcano
A9176128
Battery compartment XS, 2 x AA or 1 x 9V
Suitable for DATEC-CONTROL XS. An add-on battery compartment for 2 x 1.5 V mignon-cells (AA) or 1 x 9 V flat battery (PP3). It is secured without screws. After the upper and lower parts of the case have been mounted, it is held automatically. Set of battery clips (accessory).
Supply
1 battery compartment
关闭
Battery compartment XS, 2 x AA or 1 x 9V
ABS
(UL 94 HB)
A9176137
Station XS
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version
Desktop version
Supply
1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
关闭
Station XS
ABS
(UL 94 HB)
off-white RAL 9002
A9176139
Station XS
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version
Desktop version
Supply
1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
关闭
Station XS
ABS
(UL 94 HB)
black RAL 9005
A9176158
Battery compartment XS, 3 x AA
Suitable for DATEC-CONTROL XS. An add-on battery compartment for 3 x 1.5 V AA batteries (IEC LR6 1.5 V). It is secured without screws. After the upper and lower parts of the case have been mounted, it is held automatically. Set of battery clips (accessory).
Supply
1 battery compartment
关闭
Battery compartment XS, 3 x AA
ABS
(UL 94 HB)
off-white RAL 9002
A9177001
Display window S
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply
1 display window, 1 adhesive foil
关闭
Display window S
Acrylglas
clear
A9177006
Sealing kit S
Application: for increasing the protection class, of DATEC-CONTROL S.
Supply
1 sealing kit
关闭
Sealing kit S
A9177008
Protector S
Special protector for DATEC-CONTROL S. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Supply
1 protector
关闭
Protector S
SBS (TPE)
volcano
A9177137
Station S
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version
Desktop version
Supply
1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
关闭
Station S
ABS
(UL 94 HB)
off-white RAL 9002
A9177139
Station S
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version
Desktop version
Supply
1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
关闭
Station S
ABS
(UL 94 HB)
black RAL 9005
A9177310
Battery compartment, 1 x 9 V
Application: for 1 x 9 V flat battery (PP3).
Supply
1 battery compartment, assembly kit
关闭
Battery compartment, 1 x 9 V
ABS
(UL 94 HB)
A9178001
Display window M
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply
1 display window, 1 adhesive foil
关闭
Display window M
Acrylglas
clear
A9178006
Sealing kit M
Application: for increasing the protection class, of DATEC-CONTROL M.
Supply
1 sealing kit
关闭
Sealing kit M
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, male
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, female
gold-plated
A9178108
Protector M
Special protector for DATEC-CONTROL M. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version
without hanging belt.
Supply
1 protector
关闭
Protector M
SBS (TPE)
volcano
A9178118
Battery compartment holder
Enables the mounting of a battery compartment in the station and case. For mounting the battery compartment holder there are two positions possible-according to local requirements and configuration of components.
Supply
1 battery compartment holder, set of battery clips for connection to versions I and II battery compartment, 2 fixing screws
关闭
Battery compartment holder
PC
volcano
A9178128
Battery compartment, M/L, 4 x AA
Used in combination with the battery compartment holder in the case and in the station. Secure snap-in machanism.
Version
For 4 mignon cells 1.5 V (AA)
Supply
1 battery compartment, 1 battery lid, 1 set of battery clips, 1 screw
关闭
Battery compartment, M/L, 4 x AA
PC
volcano
A9178137
Station, Vers. I
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version
Desktop version
Supply
1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
关闭
Station, Vers. I
ABS
(UL 94 HB)
off-white RAL 9002
A9178139
Station, Vers. I
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version
Desktop version
Supply
1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
关闭
Station, Vers. I
ABS
(UL 94 HB)
black RAL 9005
A9178158
Battery compartment, M/L, 5 x AA
Used in combination with the battery compartment holder in the case and in the station. Secure snap-in machanism.
Version
For 5 mignon cells 1.5 V (AA)
Supply
1 battery compartment, 1 battery lid, 1 set of battery clips, 1 screw
关闭
Battery compartment, M/L, 5 x AA
PC
volcano
A9178167
Station, Vers. II
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version
Wall-mounting
Supply
1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, locking mechanism
关闭
Station, Vers. II
ABS
(UL 94 HB)
off-white RAL 9002
A9178169
Station, Vers. II
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version
Wall-mounting
Supply
1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, locking mechanism
关闭
Station, Vers. II
ABS
(UL 94 HB)
black RAL 9005
A9178178
End plate for electronic area, Vers. I
Simply inserted into the guides in the bottom part.
Version
To close the electronic area
Supply
1 end plate for electronic area
关闭
End plate for electronic area, Vers. I
PC
volcano
A9178188
End plate for electronic area, Vers. II
Simply inserted into the guides in the bottom part.
Version
For use with a PCMCIA-card type I
Supply
1 end plate for electronic area
关闭
End plate for electronic area, Vers. II
PC
volcano
A9178198
End plate for electronic area, Vers. III
Simply inserted into the guides in the bottom part.
Version
For use with a PCMCIA-card type I
Supply
1 end plate for electronic area
关闭
End plate for electronic area, Vers. III
PC
volcano
A9178208
Protector M
Special protector for DATEC-CONTROL M. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version
With shoulder strap (approx. 1800 x 20 mm, black, with push-in buckle)
Supply
1 protector, 1 shoulder strap
关闭
Protector M
SBS (TPE)
volcano
A9179001
Display window L
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply
1 display window, 1 adhesive foil
关闭
Display window L
Acrylglas
clear
A9179006
Sealing kit L
Application: for increasing the protection class, of DATEC-CONTROL L.
Supply
1 sealing kit
关闭
Sealing kit L
A9179108
Protector L
Special protector for DATEC-CONTROL L. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version
without hanging belt.
Supply
1 protector
关闭
Protector L
SBS (TPE)
volcano
A9179208
Protector L
Special protector for DATEC-CONTROL L. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version
with shoulder strap (approx. 1800 x 20 mm, black, with push-in buckle).
Supply
1 protector, 1 shoulder strap
关闭
Protector L
SEBS (TPE)
volcano
A9199005
Strain relief
Frame for securing the cable on existing supports. Suitable for cable ø approx. 5-7 mm.
Supply
1 strain relief device, 2 screws
关闭
Strain relief
PA 6
volcano
A9226117
Wall suspension element
Two claps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply
2 claps, 2 bars, 1 holder
关闭
Wall suspension element
ABS
(UL 94 HB)
off-white RAL 9002
A9226119
Wall suspension element
Two claps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply
2 claps, 2 bars, 1 holder
关闭
Wall suspension element
ABS
(UL 94 HB)
black RAL 9005
A9226227
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX M and DATEC-CONTROL S. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply
2 claps, 2 bars, 1 holder
关闭
Wall suspension element
ABS
(UL 94 HB)
off-white RAL 9002
A9226229
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX M and DATEC-CONTROL S. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply
2 claps, 2 bars, 1 holder
关闭
Wall suspension element
ABS
(UL 94 HB)
black RAL 9005
A9226337
Wall suspension element
Wall suspension element for DATEC-CONTROL XS. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply
2 claps, 2 bars, 1 holder
关闭
Wall suspension element
ABS
(UL 94 HB)
off-white RAL 9002
A9226339
Wall suspension element
Wall suspension element for DATEC-CONTROL XS. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply
2 claps, 2 bars, 1 holder
关闭
Wall suspension element
ABS
(UL 94 HB)
black RAL 9005
A9250250
Battery spacer
The self-adhesive spacer provides mignon cells with safe support in all battery compartments which can also be used for 9 V flat batteries.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.
Supply
1 spacer
关闭
Battery spacer
PE foam
50x25x4mm
A9345217
Set of battery compartment, 4 x AA
For 4 x 1.5 V mignon-cells (AA). Complies with DIN EN 60601 (short circuit caused by incorrect insertion of batteries impossible).
Supply
1 battery compartment, battery clips nickel-plated, assembly kit
关闭
Set of battery compartment, 4 x AA
ABS
(UL 94 HB)
off-white RAL 9002
产品类型用于 Datec-Control 大屏盒
如何体现您的特殊产品？ 如有需要，我们执行所有必要的修改和精加工，提供组装完毕的机盒。
DIN 标准导轨接线盒
塑料机盒 先进的塑料外壳应用于 电子电器行业
铝材质机盒 通过混合美观塑料达到高质量的铝型材机盒
旋钮 广泛的旋钮系列: 符合人体工程学、现代式和传统式设计款式
机械加工 我们为您提供迅速可靠的定制精加工
表面涂渡 我们为您涂渡机盒和旋钮，使其达到视觉和功能方面的特殊表面效果
图文打印 我们用丝网印、移印或数码打印方式打印机盒表面、操作前板和旋钮，此外。
激光打印字体 我们为众多标准系列的塑料机盒和组件提供激光打印服务
装饰膜 我们以照片质量数码打印机盒装饰膜片的图文
特殊材质 我们按您选择的颜色提供塑料材质的标准盒和旋钮
EMC 保护 我们铝涂渡多种塑料机盒以防电磁辐射
制备 / 组装 我们提供组装工作以完成组件或机盒的整体安装
合作商 - 解决方案 我们与强大的合作伙伴进行合作
医疗行业 / 实验室 / 保健领域 人和人体工程学
测量技术 / 调控技术 / 自动化技术 人和设施精确度
机械制造和设备工程 人与生产制造
机动车技术 / 建筑工程机械 / 军事应用 / 航空技术 人和机动化
取暖设施 / 空调 / 环保技术 人和设施效率
保安技术和建筑服务设施技术 人与科技
信息交流 人和信息
矿业 / 天然气 / 石油工业 人和自然资源
有关运输和贸易条款的信息
直接来自专家的专业知识
安装说明书、证书、客户杂志 INSIDE 和专业出版社的有关文摘
PDF 和 AutoCAD DWF 格式
对环境负责
我们严格保密您的个人资料，并希望您在访问我们的网站时感到安全和舒适。
版本说明
